Dahua Password Reset Utility (For OLD Firmwares)


If you lost the password and can't have access to your DVR, here you can find different methods to recover your device to use the Dahua default password. All depends on the model you have, perhaps the solution for your problem it's right here, just keep reading...
How to reset Dahua DVR admin password
To reset a Dahua DVR and recover the admin password, you just need to either use a reset button located on the motherboard, try a default password or use a software to generate a new password based on the device date.
Let's talk about the different methods so you can try to use the one that best suits your needs according to your Dahua DVR model.

Method number 1 - Using the reset button

This method will depend on the DVR you have, some of them come with a reset button that is located on the motherboard. you just need to open your device to check if that's your case. See the following pictures that show such button.
Dahua DVR reset button 01
Note that in this DVR model there's a yellow battery at the right side and a reset button located at the opposite (right) side of the motherboard.
Dahua DVR reset button 02
In this model, the yellow battery and the reset button are located at the right side of the motherboard, pretty close of each other.
The password reset procedure
To reset the DVR to factory default just follow the steps: 
1. Power off the DVR;
2. Press and hold the button;
3. Power on the DVR;
4. Keep the reset button pressed for 30s;
5. Create a new password for the admin account.
The process must be done exactly this way. Just make sure you have a monitor attached to the DVR and the power cable is disconnected before starting the process (step 1) and connect the cable while holding the reset button. 
You must hold the button until the DVR resets, which will take around 20 to 30 seconds and you will be able to see this information in the monitor.
After the reset, the DVR will come back to factory default and ask you to create a new password just like a new installation. See the pictures below:
Dahua DVR Password Setup Screen
In the first screen, just create a new password for your DVR by using a minimum of 8 digits with a combination of letters, numbers, and symbols. 
After finishing creating the password click the "Next" button.
The next step is to create the "Unlock Pattern".
Dahua DVR Unlocking Pattern-Setup-Screen
Finally, the last step is to create the security questions just in case you need to reset the password again in the future.
Dahua DVR Unlocking Pattern-Setup-Screen

Method number 2 - Trying Dahua default password

You can try using one of the Dahua default passwords, there are some combination you can try just to see if they work with your device. 
See the list below for some of these default passwords:
User
Password
Role
admin
admin
Master account
888888
888888
Administrator
666666
666666
Restrict user
default 
default 
Hidden user
Just use some of these combinations in your Dahua DVR and perhaps you can get access to the device either as admin or a regular user (if that is enough).
Dahua DVR Login
After this step, the DVR will ask you to create a new password for the user.
If this method doesn't work, or you can get access as a regular user but instead you really need to have admin access, try the next method.

Method number 3 - Dahua password generator

There's a password generator that can be used to reset the Dahua DVR.
You just need to download the software and input the date you see in the monitor.
DVR date and time
Type the year month and day (YYYYMMDD) into the Dahua password generator, and you will get a temporary password, just like shown in the image below:
Dahua password generator
Dahua password generator 02
After generating the temporary password use it to login into your DVR and later just change the password for something else that is better for you. 
Dahua DVR login screen
Below is the link to download the Dahua Password generator
If this method still doesn't work, just try the next one...

Method number 4 - Remove the battery

If your Dahua DVR has a removable battery, you can use this method that is also based on a password generation described in the previous method.
Just remove the battery and wait for some time (usually 2 minutes) to have the DVR clock back to its default date and time.
DVR internal battery
The DVR date usually comes back to 01/01/2000 as shown in the picture:
Old DVR date
After getting your Dahua DVR clock at this date, just trying using the following username and password combination:
User
Password
admin
668648
admin
000000000000 
If the above combination doesn't work for you, just try to generate a new password by using the Dahua DVR password generator described previously.
If that method doesn't work for you, try the next one...

Method number 5 - App DVR password generator

You can download a mobile App to generate a password for your DVR. Just look for the CCTV Super Password and install in your mobile. (see picture below).
CCTV super password reset App
The App show two different versions of the Dahua password generator, one of them to be used with the DVR date, and the other one that can be used with the DVR serial number. Both of them can generate a temporary password.
Mobile DVR Reset Tool
Just enter the Day, Month and Year that is shown in your DVR monitor and click submit, so the App returns the temporary password for that specific day.
Mobile DVR Reset Tool
As you can see in the picture above, there are three options you can try based on the date you entered. Make sure you try to use them on the same day.
The next option is to generate a temporary password based o the DVR serial number, just input such number in the App and press the Submit button. 
Super Password Dahua DVR
The image above shows an example of a temporary password generated by the app, it meant to be used just one time to get access to your Dahua DVR, so you can create a new one. Just remember to also use it on the same day.

Comments

Popular Posts