Hiseeu CCTV DVR Remote View Setup

 
There are four methods to view the camera system remotely. Please refer to these step below.


1) First you need to connect the NVR to your router with an Ethernet cable to keep the NVR online.
Note:NVR cannot be connected to router via WiFi signals.
If NVR displays Offline, Pls refer to this link
http://www.hiseeu.com/news/wirelessskitfaq/54.html




2)To view on the Phone
a) Setup NVR box
Please reset your password:right click mouse>system setup>system admin>user>setuppassword>change a new password(Password must be within 8 characters)
b) Setup Mobile Phone
Scan below code download "IP-pro”or"Eseecloud3"

c) Click Add >Networked devices> input Cloud ID and User name and password (If you doesn't change the user name and password, User Name is admin password is empty you don't need input anything)
(Cloud ID is in the lower right corner of the screen )






3)To view via Eseecloud software on PC
a) Click Add button

b) Input Cloud ID (Cloud ID is in the lower right corner of the screen )
Input User Name and Password (If you doesn't change the user name and password, User Name is admin password is empty you don't need input anything)

c) Double Click Cloud ID



4) To View on the the PC via IP address of the camera system
To view on browser, you have to connect the NVR and your computer to the same router.
Enter the IP address of NVR on the browser's address bar.(We recommend using IE or Micorosoft Edge)
Right click the mouse>system setup>Network Setup>IP address (Start with 192.168... )





5)To View on IE browser
You can also visit www.dvr163.com via IE browser to watch it.
But, you have to change the language first.
Input your Cloud ID and Username and Password





Comments