Hikvision Error Code 7

Here is the full detail of this error code:

Full Name or Hikvision Error Code 7 : -NET_DVR_NETWORK_FAIL_CONNECT 7 

Meaning of this Error Code: Failed to connect to the device. The device is off-line, or connection timeout caused by network.

So as you can see this error code means your Device is offline due to some mistake in your network configuration or it is power off. So please follow below issues first:

1. Power must be on.

2. IP Address of Device is same as your network ip series.

If your network ip address is 192.168.1.XXX then your device ip address must be in same 192.168.1.XXX (XXX.XXX.1.XXX) Series.

3. Subnet Mask 255.255.255.0 must be same in your network connected device and ip camera.

4. If all of above settings are correct. Please go to device setting and close auto update feature of IP Camera device.

if you follow about steps and check all one by one in your IP Camera device, Your problem will be solved. Next time Hikvision Error Code 7 will not come up.

If you have any question related to below Error Codes Please drop a comment. 

hikvision error code 7,

hikvision error code 246520,

hikvision error codes list,

net_dvr_err_license_plate_null,

hikvision unknown error -1,

hcnetsdk.dll 9,

hikvision ip address does not match,

hik-connect error codes,

ezviz sdk error,

hikvision error code 34,

hik connect error codes 330007,

registration failed error code 41 hikvision,

hcnetsdk.dll 23,

hcnetsdk.dll 11,

hikvision auto change stream type,

ivms 4200 error code hcnetsdk.dll 9,

hcnetsdk.dll 13 no permission,

error code hcnetsdk.dll 47,

failed to get stream hikvision,

failed to receive data from the device,

reconnecting error code sms 26,

hcnetsdk error 43,

hcnetsdk not supported,

hik connect error code 302,

For Instant Support Please do Subscribe Our YouTube Channel: CCTV Networking Technical Support